Annual Service

 Items Included For All Machines:

Items Included For Internal Combustion Machines: 

• Complete Steam Clean (1 hr max)

• Change Oil & Filter 

• Comprehensive Safety Inspection

• Conduct Compression & Leak Down Tests 

• Operational Check

• Inspect Intake Hoses, Elbows & Clamps 

• Written Condition Report

• Check Belts' Condition & Tension 

• Check Battery Electrolyte Levels

• Inspect Muffler & Exaust Pipe 

• Clean Battery Cables & Terminals

• Inspect Fuel System & Lines 

• Change Hydraulic Oil & Filter

• Change L.P.G. Filters 

• Inspect Mast & Carriage

• Check & Adjust High / Low Idles 

• Inspect Steering System & Steer Axle 

•  Change Transmission Oil & Filter

• Complete Lubrication

• Clean Water Trap (Diesel Units) 

• Repack Steer Wheel Bearings

•  Check Cold Start & Glow Plugs (Diesel Units)

• Pull Drums & Inspect Brake System (excludes internal brakes) 

•  Inspect & Clean or Replace As Needed: Air Fliter (clean canister), PCV Valve, Fuel Filter, Spark Plugs, Distributor Cap, Rotor, Spark Plug Wires

• Check Control Panel Connections 

• Inspect Contactor Tips 

• Inspect Contactor Assemblies' Operation 

• Check Operation of All Switches 

• Check Operation of Potentionmeter 

• Air Clean All Motors 

• Check All Motor Brushes

• Change Drive Unit Oil

• Clean Battery & Battery Box