| Specifications | FGC35K | FGC40K | FGC40K STC | FGC45K C | FGC45K STC | FGC55K | FGC55K STC | FGC60K | FGC70K | FGC70K STC | | Load Capacity | 7,000 | 8,000 | 8,000 | 10,000 | 10,000 | 12,000 | 12,000 | 13,500 | 15,500 | 15,500 | | Overhead Guard Height | 86.8 | 86.8 | 86.8 | 86.8 | 86.8 | 86.8 | 86.8 | 88.8 | 88.8 | 88.8 | | Width | 46.5 | 46.5 | 46.5 | 46.5 | 46.5 | 52 | 52 | 56.7 | 56.7 | 56.7 | | Travel Speed Loaded/Unloaded | 11.8/12.1 | 11.8/12.1 | 11.8/12.1 | 11.5/12.1 | 11.5/12.1 | 11.2/12.1 | 11.2/12.1 | 13/14.3 | 12.7/14.3 | 12.7/14 | | Engine | GM V6 | GM V6 | GM V6 | GM V6 | GM V6 | GM V6 | GM V6 | GM V6 | GM V6 | GM V6 | | HP | 92.5 | 92.5 | 92.5 | 92.5 | 92.5 | 92.5 | 92.5 | 92.5 | 92.5 | 92.5 | | RPM | 2,450 | 2,450 | 2,450 | 2,450 | 2,450 | 2,450 | 2,450 | 2,450 | 2,450 | 2,450 |
Mitsubishi’s FGC35K – FGC70K internal combustion (IC) cushion-tired forklifts are built to perform in the most strenuous work environments that require heavy lifting. The combination of enduring strength and high productivity makes undertaking the more challenging applications less stressful for the operator with these IC cushion-tired lift trucks. Operator Comfort & Safety Mitsubishi considered the comfort of forklift operators when designing these lift trucks, providing everything from contoured, full suspension vinyl seats to memory tilt steering. Operators have a clear view of the load and their surroundings thanks to narrow mast channels and two forward work lights. Operators are kept safe when entering and exiting the forklift cab thanks to an open step, conveniently located grab bar and hip seat restraint, making up a three-point entry system. And, should an operator leave the normal seated position, Mitsubishi’s Integrated Presence System (IPS) temporarily disengages the drive and hydraulic functions. Performance These Mitsubishi IC Cushion-tired lift trucks come with GM 4.3L engines, which were designed for demanding conditions. The GM engine meets strict CARB and EPA emissions standards and the drive-by-wire throttle control enhances fuel efficiency, thus reducing emissions and allowing for responsive acceleration. Maintenance & Warranty Mitsubishi forklifts only need to be serviced every 500 hours. Parts and labor for all systems on the lift trucks are covered under warranty for one year. Applications: - Paper products
- Allied products
- Fabricated metals
- General warehousing
- Storage applications
- Indoor applications
Available Options: - Foot directional control
- Ground speed control
- Fuel saver mode
- A dust & foundry package
- Light, strobe and Signal Options
|
|
